Wall mounted Automatic chlorinator M 3600 C
Capacity: up to 10 kg/h
- Heavy duty performance
- Remote or Manual control from motor valve or rate valve
- Vacuum indication
Automatic chlorinator series M 3600 C is a heavy duty feed unit intended for accurate manual or automatic feed of chlorine gas into water. It is designed to be controlled from controller (automatic control) or in case of need it can simply be switched to manual control.
The unit M 3600 C consist of:
- Motor rate valve series M 3521 C
- ERB gas flow meter of corresponding capacity with manual rate valve
- Vacuum gauge
- Wall mounting board with piping and valves for manual bypass of motor valve
Optional differential pressure regulator is available in case of long vacuum lines or fluctuating vacuum.
Electromotive rate valve Series M 3521 C is made of compact plastic, resistant to high concentration of chlorine, precision rate valve and quality driving motor. Gas flowmeter is also made of compact plastic, resistant to high concentration of chlorine and precision manual rate valve. All seals are made of materials resistant to aggressive gases (FKM, PTFE, PVDF). All this guarantees a safe, long and accurate functioning of automatic chlorinator.
Automatic chlorinator is mounted between ejector and vacuum regulator. It is connected to AQUACON M 5500 C or AQUAProcessor series M 5600 C which opens or closes the motor valve on chlorinator according to the signal received from water flow meter and/or residual chlorine analyser. In case of controller malfunction the feed rate can easily be set manually on the motor valve (switch remote/manual and switch open/close). In case of motor valve failure, manual feed can be adjusted by rate valve on the gas flow meter. Motor valve can then easily be dismounted from chlorinator without interrupting the dosing process. When repaired, it can easily be assembled back and set into operation.
from 12 g/h up to 10 kg/h
24 V 50-60 Hz - Sinhron
Condensator: 8,2 µF
Supply: 24 VAC
Protection: IP 65
from 10 g/h to 200 kg/h
Vacuum (up to 15m):
2 kg/h – d8/d10 - 3/8''
4 kg/h – d8/d10 - 3/8''
10 kg/h – d12/d16 - 5/8''
For larger vacuum lines, see table: Chlorine vacuum line size requirements